|
Product Details:
|
| Type: | Ball | Seals Type: | ZZ 2RS OPEN |
|---|---|---|---|
| Bore Size: | 4 Mm | Precision Rating: | P0 P6 P5 P4 |
| Structure: | Deep Groove | Number Of Row: | Single Row |
| OEM: | Accept | ||
| High Light: | 4x12x4mm Flange Bearing,ABEC-7 Flange Bearing,F625ZZ |
||
ABEC-5 4x12x4mm flange bearing 604
Bearings Introductions:
Specification:
| Item | MFSERIES |
| Type | Deep groove ball bearing |
| Model Number | F625ZZ |
| Brand | silurian |
| Dimension(dxDxB) | 4*12*4 mm |
| Outer Ring | Chrome steel |
| Inner Ring | Chrome steel |
| Cage | Steel sheet, Nylon, Brass |
| Precision Grade | P0 ( ABEC1 ), P6 ( ABEC-3 ), P5 ( ABEC-5 ) |
| Vibration Grade | Z1V1 Z2V2 Z3V3 |
| Grease Speed | 15000-20000 |
Introduction of Deep groove ball bearing:
Deep groove ball bearing mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed, large size range and varations of structure, they are suitable for precision instruments, low noise motors, automobiles,motorcycles,and other common machinery, as a widely used type of bearings in machinery industry.
Sealed deep groove ball bearings
Deep groove ball bearings with sealing disks (contacting gaskets) or covering disks (non-contacting gaskets) allow simple designs. Bearings are offered both with one and two sealing or covering disks. Bearings with two-side gaskets are filled with top quality grease. Sealed bearings can be used in a temperature range from – 30 °C to max. 110 °C (short term) for contacting and up to max. 120 °C for non-contacting gaskets. One should note here, that the period of grease use will reduce at a permanent temperature of > 70 °C. Special greases are offered for such cases.
PHOTOS OF BEARINGS:
| earing NO | Boundary diamensions (mm) | Mass(g) | |||||||||||
| Open | Shielded | d | D | D1 | D2 | B | B1 | C1 | C2 | r min | r1min | open | shield |
| MF85 | -- | 5 | 8 | 9.2 | -- | 2 | -- | 0.6 | -- | 0.1 | -- | 0.33 | -- |
| -- | MF85ZZ | 5 | 8 | -- | 9.2 | -- | 2.5 | -- | 0.6 | -- | 0.1 | -- | 0.41 |
| MF95 | MF95ZZ | 5 | 9 | 10.2 | 10.2 | 2.5 | 3 | 0.6 | 0.6 | 0.15 | 0.15 | 0.59 | 0.66 |
| MF105 | MF105ZZ | 5 | 10 | 11.2 | 11.6 | 3 | 4 | 0.6 | 0.8 | 0.15 | 0.15 | 1.05 | 1.46 |
| F685 | F685ZZ | 5 | 11 | 12.5 | 12.5 | 3 | 5 | 0.8 | 1 | 0.15 | 0.15 | 1.37 | 2.18 |
| F695 | F695ZZ | 5 | 13 | 15 | 15 | 4 | 4 | 1 | 1 | 0.2 | 0.2 | 2.79 | 2.84 |
| F605 | F605ZZ | 5 | 14 | 16 | 16 | 5 | 5 | 1 | 1 | 0.2 | 0.2 | 3.9 | 3.85 |
| F625 | F625ZZ | 5 | 16 | 18 | 18 | 5 | 5 | 1 | 1 | 0.3 | 0.3 | 5.37 | 5.3 |
| F635 | F635ZZ | 5 | 19 | 22 | 22 | 6 | 6 | 1.5 | 1.5 | 0.3 | 0.3 | 9.49 | 9.49 |
| MF106 | MF106ZZ | 6 | 10 | 11.2 | 11.2 | 2.5 | 3 | 0.6 | 0.6 | 0.15 | 0.1 | 0.65 | 0.77 |
| MF126 | MF126ZZ | 6 | 12 | 13.2 | 13.6 | 3 | 4 | 0.6 | 0.8 | 0.2 | 0.15 | 1.38 | 1.94 |
| F686 | F686ZZ | 6 | 13 | 15 | 15 | 3.5 | 5 | 1 | 1.1 | 0.15 | 0.15 | 2.25 | 3.04 |
| F696 | F696ZZ | 6 | 15 | 17 | 17 | 5 | 5 | 1.2 | 1.2 | 0.2 | 0.2 | 4.34 | 4.26 |
| F606 | F606ZZ | 6 | 17 | 19 | 19 | 6 | 6 | 1.2 | 1.2 | 0.3 | 0.3 | 6.58 | 6.61 |
| F626 | F626ZZ | 6 | 19 | 22 | 22 | 6 | 6 | 1.5 | 1.5 | 0.3 | 0.3 | 9.09 | 9.09 |
| F636 | F636ZZ | 6 | 22 | 25 | 25 | 7 | 7 | 1.5 | 1.5 | 0.3 | 0.3 | 14.6 | 14.7 |
| MF127 | MF127ZZ | 7 | 11 | 12.2 | 12.4 | 3 | 3 | 0.6 | 0.6 | 0.15 | 0.1 | 0.72 | 0.82 |
| MF137 | MF137ZZ | 7 | 13 | 14.2 | 14.6 | 4 | 4 | 0.6 | 0.8 | 0.2 | 0.15 | 1.7 | 2.23 |
| F687 | F687ZZ | 7 | 14 | 16 | 16 | 5 | 5 | 1 | 1.1 | 0.15 | 0.15 | 2.48 | 3.37 |
| F697 | F697ZZ | 7 | 17 | 19 | 19 | 5 | 5 | 1.2 | 1.2 | 0.3 | 0.3 | 5.66 | 5.65 |
| F607 | F607ZZ | 7 | 19 | 22 | 22 | 6 | 6 | 1.5 | 1.5 | 0.3 | 0.3 | 8.66 | 8.66 |
| F627 | F627ZZ | 7 | 22 | 25 | 25 | 7 | 7 | 1.5 | 1.5 | 0.3 | 0.3 | 14.2 | 14.2 |
| MF128 | MF128ZZ | 8 | 12 | 13.2 | 13.6 | 2.5 | 3.5 | 0.6 | 0.8 | 0.15 | 0.1 | 0.82 | 1.15 |
| F148 | MF148ZZ | 8 | 14 | 15.6 | 15.6 | 3.5 | 4 | 0.8 | 0.8 | 0.2 | 0.15 | 2.09 | 2.39 |
| F688 | F688ZZ | 8 | 16 | 18 | 18 | 4 | 5 | 1 | 1.1 | 0.2 | 0.2 | 3.54 | 4.47 |
Advantages
SMR95 Bearings, extra light bearings are normally used in applications where space limitations are a primary consideration and shaft sizes are relatively large. 6200 6300 Series Bearings mainly take radial load as well as moderate axial load. With less coefficient of friction, less vibration and noise,less energy consumption, high limiting speed, large size range and variations of structure. Their straight forward basic design has many advantages:
1. Excellent for high speeds
2. High radial load capacity
3. Acceptable axial load capacity in both directions
4. Have low torque capacity at startup and running speeds
5. Can operate with low noise
6. Require little maintenance
Shipping details:
Contact Person: Admin
